Skip to content


CCT Phase cut,Dimmable driver, LED,

CCT Tunable Phase Cut Dimmable Driver

1. CCT + Dimming
2. Linear Dimming & Tuning
3. Dimming range upto 1%
4. Leading & Trailing Edge
5. Flicker Free

A CCT Tunable phase cut dimmable driver refers to a type of LED driver that allows for dimming and control of the Correlated Color Temperature (CCT) of the connected LED lights. CCT Phase cut driver is specifically designed to enable the adjustment of the color temperature output of tunable white LED lighting systems.

CCT phase cut dimmable drivers enable the control of both the brightness level and the color temperature of the LED lights. This allows for dynamic adjustment of the lighting output from warm white (lower color temperature) to cool white (higher color temperature) and any CCT in between.

CCT phase cut dimmable drivers are compatible with different phase-cut dimming systems and standards, such as leading-edge or trailing-edge phase-cut dimmers. It’s crucial to verify compatibility to ensure proper integration with the dimming controls used in your installation.

Model No: JUDCTDN-6-23W

Wattage: 4W to 20W

Page Title
Length 113mm
Breadth 43mm
Height 29mm
Connector No
Prewired Yes
Weight 84 grm
Page Title  
Values Parameters
Input Voltage 220V-240Vac
Input Wattage 6W-23W
Output Wattage 4W-20W
Frequency 50-60Hz
Power Factor (full load) >0.9
THD (full load) <20%
Efficiency (full load) >80%
Inrush Current <6A
O/P Current Type Constant Current
O/P Current Tolerance 3%
Galvanic Isolation SELV
Page Title Page Title
Dimming method Phasecut
Color Tuning Yes
Color Temperatue Range 2700K-6500K
Channel required from Automation Two
Dimming Profile Linear
Dimming Range 1-100%
Surge Protection <6KV
Over Voltage Protection Yes
Over Current Protection Yes
Short Circuit Protection Yes
Class ||
Suitable for Emergency Lighting No
Isolated Yes
Page Title
Ambient Temperature 50°C
Case Temperature 70°C
Enclosure Material Plastic
Enclosure Color White